Fuji Frenic-Mini C2

The Frenic-Mini C2, with its rich functionality, compact design, simple operation, and global compatibility; elevates the performance of a wide range of devices and equipment, such as conveyors, fans, pumps, centrifugal separators, food processing machines, etc.

Specification and prices below:

Input Ratings Voltage/Frequency 380-480VAC 50/60Hz 3 Phase, 200-240VAC 50/60Hz 1 Phase
Tolerance Voltage:+10 to -15%, voltage unbalance:2% or less, 3 phase / ±10% 1 phase
Frequency:±5%
Output overload capability 150% of rated current for 1 min or 200% of rated current for 0.5s
Frequency Maximum 25-400Hz
Base 25-400Hz
Starting 0.1-60.0Hz
Carrier 0.75-16kHz
Starting Torque 150% or more / frequency set to 3Hz
Slip compensation / automatic torque boost active
Braking Standard Torque 3 Phase: 100% (0.4-0.75kW), 50% (1.5kW), 30% (2.2-4.0kW), 20% (5.5-15kW, w/o EMC-filter built-in)
1 Phase: 150% (0.1-0.2kW), 100% (0.4-0.75kW), 50% (1.5kW), 30% (2.2kW)
DC Injection Braking Starting Frequency 0.0-60Hz
Braking Time 0.0-30s
Braking Level 0-100%
Control Method

Induction motor: V/f control - Slip compensation - Automatic torque boost - Dynamic torque vector control
Synchronous motor: Sensorless magnetic positioning (speed control range: 10% of base frequency and up)

Acceleration/Deceleration Time 0.0-3600s
Multistep Frequency Selectable from 16 steps (step 0-15)
Frequency Setting Control (Analogue Input) 0-10VDC / 0-100% (terminal 12)
4-20mA DC / 0-100%, 0-20mA DC / 0-100% (termincal C1)
Standard Functions
  • Dynamic Torque Vector
  • PID control function
  • Sensorless synchronous motor control
  • RS-485 communication port
  • Braking signal function
  • Motor switching function, motor auto-tuning
  • High starting torque, at 150% or more
  • Braking resistor connectable to the inverter
  • Tripless deceleration by automatic deceleration control
  • Automatic energy-saving function
  • Frequency setting potentiometer
Protection
  • Overcurrent
  • Short-crcuit
  • Ground fault
  • Undervoltage
  • Input phase loss
  • Inverter overheat
  • Braking resistor overheat
  • Overload
  • Motor Electronic thermal overload relay
  • PTC thermister
  • Motor Overload early warning
  • Stall prevention
  • Step-out detection
  • External alarm input
  • Memory error
  • Remote keypad (option)
  • Communications error
  • CPU error
  • Operation error
  • Tuning error
  • RS-485 communications error
  • Data save error during undervoltage
  • Surge protection
  • Protection against momentary power failure
  • Overload prevention control
  • Mock alarm
  • PID feedback wire break detection
Enclosure (IEC/EN60529) IP20 (IEC 60529:1989) / UL open type (UL50)
Cooling Method Natural cooling (up to 0.75kW), Fan cooling (1.5kW and above)
Conformed Standards EC Directive (CE Marking), UL standard (cUL cerification)

 

Model
Number
Motor Power Rated Current Unit
Price
  Dimensions (mm)
150% of rated current for 1min Height Width Depth
230V Single-phase with built-in RFI filter
FRN0004C2E-7E 0.4kW 3.5A £275.00   170 80 115
FRN0006C2E-7E 0.75kW 5.5A £312.50 180 110 139
FRN0010C2E-7E 1.5kW 9.2A £337.50 245 140 182
FRN0012C2E-7E 2.2kW 12.0A £375.00
230V Single-phase
FRN0004C2S-7E 0.4kW 3.5A £250.00   120 80 95
FRN0006C2S-7E 0.75kW 5.5A £275.00 140
FRN0010C2S-7E 1.5kW 9.2A £300.00 130 110 149
FRN0012C2S-7E 2.2kW 12.0A £337.50 180 140 139
200V Three-phase without built-in RFI filter
FRN0004C2S-2A 0.4kW 3.5A £240.33   120 80 95
FRN0006C2S-2A 0.75kW 5.5A £266.38 120
FRN0010C2S-2A 1.5kW 9.2A £306.60 130 110 139
FRN0012C2S-2A 2.2kW 12.0A £335.10
FRN0020C2S-2A 3.7kW 19.1A £363.28 180 140
400V 3ph with built-in RFI filter
FRN0002C2E-4E 0.4kW 1.8A £412.50   180 110 158
FRN0004C2E-4E 0.75kW 3.1A £450.00 182
FRN0005C2E-4E

1.5kW

4.3A £525.00 245 140
FRN0007C2E-4E 2.2kW 6.3A £625.00
FRN0011C2E-4E 4.0kW 10.5A £775.00
FRN0013C2E-4E 5.5kW 13.0A £837.50 285 181.5 TBC
FRN0018C2E-4E 7.5kW 18.0A £937.50
FRN0024C2E-4E 11kW 24.0A £1,075.00 332 220 245
FRN0030C2E-4E 15kW 30.0A £1,525.00
400V 3ph
FRN0002C2S-4E 0.4kW 1.8A £362.50   130 110 115
FRN0004C2S-4E 0.75kW 3.1A £375.00 139
FRN0005C2S-4E 1.5kW 4.3A £450.00
FRN0007C2S-4E 2.2kW 6.3A £550.00
FRN0011C2S-4E 4.0kW 10.5A £675.00 180 140
FRN0013C2S-4E 5.5kW 13.0A £762.50 220 180 158
FRN0018C2S-4E 7.5kW 18.0A £875.00
FRN0024C2S-4E 11kW 24.0A £987.50 260 220 190
FRN0030C2S-4E 15kW 30.0A £1,350.00

Back to Fuji