Fuji Frenic-Ace E2

The Frenic-Ace is the inverter excellent cost-performance while maintaining its high performance through optimal design. With the 200 steps of its customised logic as a standard feature, it enables users to customise their inverters from simple logistics to full-scaled programming.

As a standard inverter for the next generation which can be applied to various machines and devices, Frenic-Ace can be used in almost any type of application from fans and pumps up to specialised machines.

Specification and prices below:

Input Ratings Voltage/Frequency 380-480VAC, 50/60Hz
Tolerance Voltage:+10 to -15%, Voltage unbalance:2% or less, Frequency:±5%
Output overload capability 150% of rated current for 1min, 200% of rated current for 0.5s
Frequency Maximum HHD/HND/HD mode: 25-500Hz variable under V/f control, magnetic pole position sensorless vector control (Up to 200Hz under vector control with speed sensor)
ND mode: 25-120Hz (under any drive control)
Base 25-500Hz variable (in conjunction with max. frequency)
Starting 0.1-60Hz variable (0.0Hz under vector control with speed sensor)
Carrier 0.75-16kHz (up to and including 55kW in HD)
0.75-10kHz (75kW and above in HD)
0.75-10kHz (up to and including 30kW in ND)
0.75-6kHz (37kW and above in ND)
Starting Torque 200% or above, ref. frequency 0.5Hz (HD 22kW or below), 150% or above, ref. frequemcy 0.5Hz (HD 30kW or above), 120% or above, ref. frequency 0.5Hz (HD/ND), 150% or above, ref. frequency 0.5Hz (HD), Base frequency 50Hz, with slip compensation and auto torque boost active.
Braking Standard Torque  
DC Injection Braking Starting Frequency 0.0-60Hz
Braking Time 0.0-30s
Braking Level 0-100%
Control Method Induction motor: V/f control - Vector control without speed sensor (Dyna-mic torque vector) - V/f conrol, with slip compensation - V/f control, with slip sensor (PG option) - V/f control with speed sensor (+Auto Torque Boost) (PG option) - Vector control with speed sensor (PG option)
Synchronous motor: Vector control without magnetic pole position sensor
Acceleration/Deceleration Time 0.0-6000s
Multistep Frequency 16 steps
Frequency Setting Control (Analogue Input) 0-±10VDC (±5VDC) / 0-±100% (term. [12]), 0-10VDC (+5VDC) / 0-100% (term. [12]), 4-20mADC / 0-±100% (term. [C1] (C1 function)), 4-20mADC / 0-±100% (term. [C1] (C1 function)), 0-20mADC / 0-±100% (term. [C1] (C1 function)), 0-20mADC / 0-±100% (term. [C1] (C1 function)), 0-10VDC (+5VDC) / 0-100% (term. [C1] (V2 function)), 0-10VDC (+5VDC) / 0-100% (term. [C1] (V2 function))
Standard Functions
  • Customisable logic
  • Droop control
  • Torque control
  • PID control (with Dancer control)
  • Torque limiter
  • Auto-tuning
  • Online tuning
  • 1st and 2nd motor settings
  • Zero speed control
  • Positioning control with pulse counter
  • Master-follower operation
  • Pre-excitation
  • DC Braking
  • Mechanical brake control
Protection
  • Overcurrent (short-circuit, ground fault)
  • Overvoltage
  • Incoming surge
  • Undervoltage
  • Input phase loss
  • Overheating
  • Motor overload (Electronic thermal overload trip)
  • Stall prevention
  • External alarm input
  • Memory error
  • Communication error (Keypad, option, RS-485)
  • CPU error
  • Option error
  • Output phase loss error
Enclosure (IEC/EN60529) IP20 closed type, UL open type (22kW and smaller), IP00 open type, UL open type (30kW and larger)
Cooling Method Fan cooling
Conformed Standards EC Directive (CE Marking), UL standard (cUL cerification), STO

 

Model
Number
Motor Power (kW)   Rated Current (A) Unit
Price
  Dimensions (mm)
HHD* HND* HD* ND* HHD* HND* HD* ND* Height Width Depth
230V single phase (HHD rating 200% overload)
FRN0003E2E-7GA 0.55kW   3.0A £312.50   127 68 107
FRN0005E2E-7GA 0.75kW 5.0A £337.50 152
FRN0008E2E-7GA 1.5kW 8.0A £450.00 130 110 153
FRN0011E2E-7GA 2.2kW 11A £550.00 140 143
400V three phase*
FRN0002E2E-4GA 0.4 0.75 0.75 0.75   1.5 1.8 1.8 2.1 £475.00   140 110 162
FRN0004E2E-4GA 0.75 1.1 1.1 1.5 2.5 3.4 3.4 4.1 £525.00 186
FRN0006E2E-4GA 1.5 2.2 2.2 2.2 4.2 5.0 5.0 5.5 £600.00 140 199
FRN0007E2E-4GA 2.2 3.0 3.0 3.0 5.5 6.3 6.3 6.9 £650.00
FRN0012E2E-4GA 3.7 5.5 5.5 5.5 9.0 11.1 11.1 12 £812.50
FRN0022E2E-4E 5.5 7.5 7.5 11 13 17.5 17.5 21.5 £1,025.00 230 180 158
FRN0029E2E-4E 7.5 11 11 15 18 23 23 28.5 £1,125.00
FRN0037E2E-4E 11 15 15 18.5 24 31 31 37 £1,275.00 270 220 190
FRN0044E2E-4E 15 18.5 18.5 22 30 38 38 44 £1,625.00
FRN0059E2E-4E 18.5 22 22 30 39 45 45 59 £1,937.50 400 250 195
FRN0072E2E-4E 22 30 30 37 45 60 60 72 £2,400.00
FRN0085E2E-4E 30 37 37 45 60 75 75 85 £3,187.50 550 326.2 261
FRN0105E2E-4E 37 45 45 55 75 91 91 105 £4,050.00
FRN0139E2E-4E 45 55 55 75 91 112 112 139 £4,875.00 615 361.2 276
FRN0168E2E-4E 55 75 75 90 112 150 150 168 £5,375.00 675
FRN0203E2E-4E 75 90 90 110 150 176 176 203 £6,687.50 740
FRN0240E2E-4E 90 110 110 132 176 210 210 240 £8,100.00 536.4 321
FRN0290E2E-4E 110 132 132 160 210 253 253 290 £9,200.00
FRN0361E2E-4E 132 160 160 200 253 304 304 361 £11,125.00 1000 366
FRN0415E2E-4E 160 200 200 220 304 377 377 415 £13,500.00
FRN0520E2E-4E 200 220 220 280 377 415 415 520 £14,500.00 686.4
FRN0590E2E-4E 220 280 250 315 415 520 477 590 £16,875.00

*Overload - HHD: 150% 1min, 200% 0.5s / HND, ND: 120% 1min / HD: 150% 1min
Temperature: at 40°C for HD and ND, at 50°C for HHD and HND
Carrier frequency: at 4kHz for HD, ND (from 0072 to 0168), at 6kHz for HND (from 0072 to 0168), at 10kHz for HHD (from 0072 to 0168), at 4kHz for ND, HD, HND (from 0203 to 0590), at 6kHz for HHD (from 0203 to 0590)

Back to Fuji